Jinyuan is committed to becoming the world's leading custom air compressor manufacturer

Tiếng Việt

Air Compressor 37KW Screw Power Frequency J-37AG 1

Air Compressor 37KW Screw Power Frequency J-37AG 2

Air Compressor 37KW Screw Power Frequency J-37AG 3

Air Compressor 37KW Screw Power Frequency J-37AG 4

Air Compressor 37KW Screw Power Frequency J-37AG 5

Air Compressor 37KW Screw Power Frequency J-37AG 6

Air Compressor 37KW Screw Power Frequency J-37AG 7

Air Compressor 37KW Screw Power Frequency J-37AG

The working process of screw air compressor is divided into four processes: suction, sealing and conveying, compression and exhaust. When the screw rotates in the shell, the air between the screw and the shell mesh through the air intake and the oil, the gear rotation seals the oil and delivers the oil to the exhaust port. During the delivery, the gear gap gradually decreases and the oil and gas is compressed. When the gear rotates to the exhaust port of the shell, the oil and gas mixture with higher pressure is discharged from the body.

Size:

1500x1000x1340 (mm)

Place of Origin:

Guangzhou, China

Minimum order quantity:

Color:

Green and black (customizable)

Packing:

Wooden case

Delivery time:

Determine according to quantity

Inquiry

Write a Review

Main features

The body design is beautiful, compact and practical, and can be installed in a limited area.

Reasonable layout of high quality shock absorbers and closed solid box chassis structure, reduce resonance and operation noise conduction.

Compression host adopts the most superior screw line technology, high efficiency, large displacement.

This air compressor strictly complies with the EACC quality management system, and the quality and safety is guaranteed.

Performance

The power frequency air compressor adopts direct transmission, with small vibration and high efficiency.

Model	Exhaust Pressure MPa	Motor Power KW	Motor Power HP	Exhaust Volume M³/min	Cooling method	Exhaust Connector IN/DN	Weight Kg	Size mm
J-08AG	0.8	7.5	10	1	Air cooled	G1/2	210	890x650x960
J-11AG	0.8	11	15	1.8	Air cooled	G3/4	310	1080x750x1050
J-15AG	0.8	15	20	2.3	Air cooled	G3/4	330	1080x750x1050
J-22AG	0.8	22	30	3.6	Air cooled	G1	510	1380x850x1170
J-37AG	0.8	37	50	6.3	Air cooled	G1½	680	1500x1000x1340
J-55AG	0.8	55	75	9.5	Air cooled	G2	1100	1750x1150x1530
J-75AG	0.8	75	100	12.5	Air cooled	G2	1320	1900x1300x1580
J-90AG	0.8	90	120	15	Air cooled	G2	1900	2200x1300x1610
J-110AG	0.8	110	150	19	Air cooled	DN65	2200	2800x1800x1800
J-132AG	0.8	132	180	21.7	Air cooled	DN65	2450	2800x1800x1800
J-160AG	0.8	160	215	26	Air cooled	DN80	2850	3200x1800x1800
J-185WG	0.8	185	250	29.4	Water cooled	DN100	3500	3200x2000x2000
J-220WG	0.8	220	295	38.1	Water cooled	DN100	4000	3200x2000x2000

product details

IP55 high efficiency motor, high dustproof and waterproof grade, brand bearing, pure copper wire, small electrical loss, stable operation

The gas control pipeline of the machine adopts stainless steel joints and pipelines to avoid poor working of the inlet valve caused by corrosion of the pipeline.

The intake pipe uses Italian Manuli, reliable quality and guaranteed quality.

The gas pipeline clip is installed at the oil return pipe, which can avoid oil leakage caused by the loose of the joint.

The air outlet is equipped with a quick interface that can connect to the air gun to facilitate the user to blow dust and clean the case.

The oil lens is thickened, and the rubber ring is isolated between the oil and gas barrel wall to avoid oil leakage caused by the rupture of the oil lens caused by high temperature.

faq

Can the machine be used directly after it arrives?

The machine parameters have been debugged before leaving the factory and can be used after installation with supporting equipment.

How is the product model named?

J represents Jinyuan series products, number represents nominal power (KW), A represents air cooled, W represents water cooled, G represents direct transmission.

How long is the replacement time of lubricating oil, oil filter, oil fine separator and air filter element?

In general, the replacement time is after use of 2500~3000h. The lubricating oil and oil filter of new machine should be changed after use of 500h. Different use environment and scene, the replacement time will also be different.

Can the color of the machine be changed?

We provide customized services, not only the colors, but also structure, performance and other on according to your needs.

Feel free to contact with us

If you have any questions about our products or services, feel free to reach out to customer service team.