Jinyuan is committed to becoming the world's leading custom air compressor manufacturer

Tiếng Việt

Oil Injection Screw Air Compressor Bulk Buy Determine According to Quantity Jinyuan Air Compressor 1

Oil Injection Screw Air Compressor Bulk Buy Determine According to Quantity Jinyuan Air Compressor 2

Oil Injection Screw Air Compressor Bulk Buy Determine According to Quantity Jinyuan Air Compressor 3

Oil Injection Screw Air Compressor Bulk Buy Determine According to Quantity Jinyuan Air Compressor

Unlock unparalleled performance and efficiency with our Oil Injection Screw Air Compressor from Jinyuan! Designed for reliability and durability, this powerhouse is perfect for any industrial application. Whether you’re scaling up production or optimizing your operations, bulk buying ensures you get the best value without compromising on quality. Experience the difference of superior engineering—boost your productivity today!

Size:

2890x1830x1800 (mm)

Minimum order quantity:

Color:

Green and black (customizable)

Packing:

Wooden case

Delivery time:

Determine according to quantity

Inquiry

Main features

High energy efficiency host, high volumetric efficiency, two-stage compression ratio than single-stage compression efficiency increased by more than 15%.

Adopt high efficiency permanent magnet motor with protection grade IP55 and insulation grade F, equipped with temperature monitoring to extend the service life of the motor.

The product reaches the first-level energy efficiency of China's new national standard, and is tested and certified by the national authority.

This air compressor strictly complies with the EACC quality management system, and the quality and safety is guaranteed.

Performance

Two stage compression host adopts segmented compression, with small compression ratio and good compression and heat dissipation. The host engine has less reflux leakage, high volume efficiency, light bearing load and long service life. The rotor of high efficiency permanent magnet motor is equipped with high-performance rare earth permanent magnet, which resists high temperature without losing magnetism. The stator coil is made of special corona resistant enameled wire, with excellent insulation performance and long service life. The motor can maintain extremely high efficiency in a large range lower than the rated speed, which ensures that the air compressor has obvious energy saving advantages when the gas consumption is small. The greater the fluctuation of the gas consumption of the pipe network, the more obvious the energy saving effect, and helps the enterprise to reduce the cost of operation.

Model	Exhaust Pressure MPa	Exhaust Volume M³/min	Motor Power KW	Motor Power HP	Cooling method	Exhaust Connector IN/DN	Weight Kg	Form factor mm
J-22AEYC	0.6	4.6	22	30	Air cooled	G1	610	1450x900x1240
	0.8	4.2
	1.0	3.2
J-37AEYC	0.6	7.6	37	50	Air cooled	G1½	980	1750x1100x1560
	0.8	7.2
	1.0	6.8
J-45AEYC	0.6	10.9	45	60	Air cooled	G2	1380	1900x1380x1720
	0.8	9.7
	1.0	7.6
J-55AEYC	0.6	13.4	55	75	Air cooled	G2	1770	2190x1430x1820
	0.8	12.6
	1.0	9.3
J-75AEYC	0.6	17.6	75	100	Air cooled	G2	1820	2190x1430x1820
	0.8	16.5
	1.0	12.6
J-90AEYC	0.6	21.8	90	120	Air cooled	DN80	2620	2890x1830x1800
	0.8	20.0
	1.0	16.9
J-110AEYC	0.6	27.1	110	150	Air cooled	DN80	2670	2890x1830x1800
	0.8	24.5
	1.0	21.2
J-110WEYC	0.6	27.1	110	150	Water cooled	DN80	2570	2620x1820x1800
	0.8	24.5
	1.0	21.2
J-132AEYC	0.6	32.0	132	180	Air cooled	DN80	2750	2890x1830x1800
	0.8	28.0
	1.0	23.5
J-132WEYC	0.6	32.0	132	180	Water cooled	DN80	2700	2620x1820x1800
	0.8	28.0
	1.0	23.5
J-160AEYC	0.6	36.0	160	215	Air cooled	DN80	4000	3300x2000x1900
	0.8	33.6
	1.0	30.0
J-160WEYC	0.6	36.0	160	215	Water cooled	DN80	3625	2790x1890x1940
	0.8	33.6
	1.0	30.0
J-185WEYC	0.6	42.6	185	250	Water cooled	DN100	4600	3140x2090x2000
	0.8	38.4
	1.0	32.5
J-200AEYC	0.6	46.0	200	270	Air cooled	DN100	5200	3600x2150x1900
	0.8	43.0
	1.0	41.5
J-200WEYC	0.6	46.0	200	270	Water cooled	DN100	4840	3140x2090x2000
	0.8	43.0
	1.0	41.5
J-220WEYC	0.6	50.0	220	295	Water cooled	DN100	5000	3140x2090x2000
	0.8	47.0
	1.0	41.0
J-250WEYC	0.6	56.6	250	335	Water cooled	DN125	6000	3340x2190x2100
	0.8	54.0
	1.0	46.0
J-280WEYC	0.6	66.0	280	375	Water cooled	DN125	7000	3340x2190x2100
	0.8	60.0
	1.0	51.0
J-315WEYC	0.6	74.0	315	420	Water cooled	DN125	9000	4400x2300x2300
	0.8	67.0
	1.0	61.0

product details

High energy efficiency host, precision inclined gear connection, so that the rotor of each stage of compression unit can obtain better linear speed, the air compressor has better energy efficiency performance. The upgraded and optimized flow channel design makes the compressed air almost zero loss through, significantly improving the efficiency.

High efficiency permanent magnet motor, no-excitation system loss, higher efficiency, more stable operation. Protection grade IP55, insulation level F. Equipped with temperature monitoring, effectively extend the service life of the motor.

The increased oil fine separator design makes the oil separation area larger, reduces the pressure drop generated in the process of oil and gas separation, and the oil content of the gas outlet is <2.0 PPM.

The gas pipeline clip is installed at the oil return pipe, which can avoid oil leakage caused by the loose of the joint.

The hose uniformly uses Italian Manuli, reliable quality and guaranteed quality.

The air outlet is equipped with a quick interface that can connect to the air gun to facilitate the user to blow dust and clean the case.

The oil lens is thickened, and the rubber ring is isolated between the oil and gas barrel wall to avoid oil leakage caused by the rupture of the oil lens caused by high temperature.

Standard temperature control valve can make smooth lubrication of the equipment at low frequency and low noise, and avoid the equipment due to light load and long time low temperature operation, resulting in lubricating oil emulsification and serious damage to the equipment. The oil filter is properly installed and can be disassembled and replaced as long as the chassis door is opened.

faq

Can the machine be used directly after its arrival?

The machine parameters have been debugged before leaving the factory and can be installed with supporting equipment.

How is the product model named?

J represents Jinyuan series products, number represents nominal power (KW), A represents air cooled, W represents water cooled, E represents two-stage, YC represents permanent magnet frequency conversion direct transmission type

How long is the replacement time of lubricating oil, oil filter, oil fine separator and air filter element?

In general, the replacement time is after use of 2500~3000h. The lubricating oil and oil filter of new machine should be changed after use of 500h. Different use environment and scene, the replacement time will also be different.

Can the color of the machine be changed?

We provide customized services, not only the colors, but also structure, performance and other on according to your needs.

Company Advantages

· Jinyuan Air Compressor oil injection screw air compressor is manufactured with the support of a team of experts.

· The product has many competitive edges, such as strong durability, high cost-performance, and so on.

· Supervised by experienced quality check staff, Jinyuan Air Compressor promises that each oil injection screw air compressor is of high performance before the package.

Company Features

· Jinyuan Air Compressor continuously improves oil injection screw air compressor effectively to protect the interests of customers.

· All of our production facilities are sanitized daily using a high-pressure cleaning system and regularly tested to make sure it meets our exacting standards.

· Clients First is always the principle we adhere to. We regard the unhappy customers are an invaluable resource that can provide an honest assessment of our products, service and business processes. We will act proactively to clients' feedback to continually improve our business.

Application of the Product

Jinyuan's oil injection screw air compressor is available in a wide range of applications.

Jinyuan is committed to providing customers with high-quality air compressor as well as one-stop, comprehensive and efficient solutions.

we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.

Air Compressor 22KW Oil-free Scroll JW-22AYCW

Fine Fliter C/T/A/H-001~025

Adsorption Dryer JH/E-0010~2000

Freeze Dryer JY-010A~JY-3600A(W)

Air Compressor 44KW 3.0MPa 4.0m³/min Medium And High-pressure JH-4.0/30

Ready to work with us ？

admin@jinyuantech.com

Guangdong Jinyuan Technology, with its professional technical strength, stable and reliable product quality, and comprehensive service support, has become a leading brand in the aerodynamic equipment industry.

Quick Links

Products

Oil injection screw air compressor

Oil-free screw air compressor